IADC 517 , Sealed Journal Bearing , With Gage Protection , TCI Tricone Bit , Medium Soft Formation
SIZE AVAILABLE
Form 3 7/8inch to 18 1/2inch
RECOMMENDED DRILLING PARAMETERS FOR APPLICATION
| Types & IADC Code |
417 |
437
447
|
517
527
|
537
547
|
617
627
|
637 |
| WOB |
KN/mm(Bit Dia.) |
0.4~0.9 |
0.4~0.9 |
0.35~1.0 |
0.5~1.0 |
0.6~1.1 |
0.7~1.2 |
| Lb/in. (Bit Dia.) |
2285~5142 |
2285~5142 |
2000~5714 |
2857~5714 |
3428~6285 |
4000~6857 |
| Rotation Speed (Rpm) |
140~60 |
140~60 |
125~50 |
110~50 |
100~40 |
80~40 |
The above chart represents commonly available sizes and types, we do produce other sizes and types of rock bits which do not appear on this list. Please contact us for more information.
Bearings
- Functions:
• Support radial load
• Support thrust or axial loads
• Secure the cone on the leg
- Supporting loads is achieved by outer and nose bearing
- Ball and friction bearings secure the cone on the leg
- Two different bearing are available: antifriction and friction
- Antifriction bearings or roller are two types: Roller-ball-roller (RBR), and roller-ball-friction
- RBR, nose roller; intermediate ball; and outer roller
- The ball secure the cone
- Size influenced by journal angle and cone size
- RBR suffers from spalling of the races of the pin
- RBR bit have short life
- Normally used with bit with diameter greater than 12.25 in with adequate space and in situation where high rotary speed is required
A tricone bit is a drill bit with a head that is divided into three main parts.
The tricone bit consists of three rotating cones working inside each other and each with its own row of cutting teeth.
The tricone bit has three roller cutter cones with a series of teeth that crush rock on the rock face as they roll over the face.
A tricone bit is a drill bit with a head that is divided into three main parts.
Product Tags:
|
|
IADC 517 TCI Tricone Bit Sealed Journal Bearing For Medium Soft Formation Images
|
